La SOFT-ENGINE  starts now the flow benches production. This product is available in three models, according to the flow the bench can measure:  "Flux 500", "Flux 800",and "Flux 1600". The bench allows the valve lift regulation using an appropriate accurated instrument and it measures the head flow vs the selected valve lift value and the pressure, both data are imposed in the software. Also, the Flow coefficient is computed using the known formulas, based on valve diameter, bore or area. The bench is used mainly by technicians who modify the engine cylinder head geometry, but the bench can measure also the flow of any mechanic part (without create the diagram but displaying the flow value). 

The software has several graphic commands and tools like curve cursor, peak and average values, charts etc... that allow a complete analysis of the stored data. The software is similar to the damper dynamometer or the HP dynamometer ones, so the user who has already our other products is favourite.

About dynamometers, SOFT-ENGINE is a company producing all possible vehicle dynamometers, from little scooters to 4wd cars. So, we produce dynamometers for scooters, minibike, motorcycles, superbike, 2WD and 4WD cars, kart and quad, little horse-power engine, motorcycle engine, and car-trucks engine. The last SOFT-ENGINE products are the new dynamometers to test industrial machines and very hi-horsepower and torque engine, like truck engines.

Moreover, since 2003, we put into the market the shock-absorbers dynamometer, for motorcycle and car dampers, so SOFT-ENGINE entered in the suspensions world also. The flow bench is another  direct conseguence of the R&D intense activity.

In these years, thanks to its company layout, SOFT-ENGINE can link the simulation (by the automotive software) with the real mechanic phenomenon measuring (thanks to the dynamometer's use): by our software (particularly the software managing the dynamometers) few mouse clicks are enough to study the data from all possible point of view. This explains why our software and the SOFT-ENGINE dynamometers are appreciated and required by leading companies and various tuners. For example, we made an official agreement with the prestigiuos "Suzuki Italia" and "Aprilia" in the past, about our motorcycle dynamometers.

Finally, SOFT-ENGINE  has a "Research and Development" internal division, collaborating with some Universities, like the "Università Politecnica delle Marche". Thanks to this "R&D" works, SOFT-ENGINE can put into the market new ideas, that transforms into new products.

Recent developments: in the recent past Soft-Engine increased its productions, infact there are some news: 

1-Car braked dynamometers "Supercar 1000 4x4 Syncro", with integral transmission

2-Engine braked dynamometer "Braker Engine 400" to test car engine.

3-Flow benches.

4-Rapid-link system to automapping the Rapid-Bike control units, during a dynamometer test.

5-New hi performance dynamometer control software "Braker 6.0 Endurance" the gas control module is included.

6-New 4-stroke engine simulation software 4TBASE 4.0 , the same performances of 4TBASE 1.0 but including computation up to four cyclinders engine. Any possible exhaust or inlat pipes layout is possible.

7- Low cost products

8-Cams 5.0: very professional software for planning and development of camshafts, with related hardware.

9-Make Prof 25: device for cam lift acquisition and cams profiles maker

Finally, we are going to improve our products to strengthen the great trust of our clients toward of us.

We are and we will be even more with you...

Falconara Marittima (AN - ITALY)

Gabriele M. Serpilli