2TTOOL SOFTWARE

2TTOOL is a software by Soft-Engine which is very easy to use and includes all you may need for a 2-stroke engine conception with a special focus on practical issues commonly necessary to engineers, such as:

• area parameters and ports optimisation;

• crank mechanism : inertial force, combustion, stress (we recommend the: VYBRO software);

• combustion chamber: compression ratio, squish and squish velocity;

• reed valves: design and work frequencies;

• exhaust length : basic length calculation;

• intake length: inertial force and pulsing calculation;

• cones and cylinders development (we recommend the CONS software).

The software is totally re-styled in the graphic aspect and several function are added. Software is compatible with Windows (Xp, Vista, Seven, Eight).

DATA INPUT

A main window is used to select the suitable computing model:

Main window

There are some dialog-windows to input the data. Here some samples:

Crankshaft and thermo dynamics cycle data input window

Reed valve data input window

Combustion chamber data input window

Intake Volumetric efficiency computing data input window

Exhaust lenght computing data input window

PORT AREAS COMPUTING

About port areas, this module is very usable. Firstly, it's possible to enable / disable the port by clicking the coresponding shape in the port areas condiguration window, adding secondary transfert port, boost, bridges etc... Later, it's possible to input the timing (the ports phases and durations), and finally each port can be directly planned giving its own shape. This shape can be a regular figure (rectangle, circle, ellipse, trapetium) or not. In this second case, it's possible to design any kind of shape by placing control point in a milimetric background, or by modifing an elliptical figure.

The cylinder ports selection

Insert the timing parameters directly 

Click each area to plan the conresponding port

Port area with a regular shape

Port area with any kind of shape (modify the elliptical shape - it is possible also to draw any shape)

RESULTS

2TTOOL gives several results, shown  by printable diagrams and charts. There is also a special chart, "Resumptive data" showing the main parameters values.

The main quantities computed by the software are: 

CRANKSHAFT - KINEMATICS:

Diagrams and charts of:

• Piston Displacement, Velocity, Acceleleration (1st order and 2nd order components);

• Volume swept by piston (its peak value is the cyclider cubic capacity);

Crankshaft (kinematic) - piston Displacement diagram

CRANKSHAFT - DYNAMICS:

Diagrams and charts of:

• Inertial forces (I order and II order components);

• Inertia Sigma (stress of inertial part of force in the piston);

CRANKSHAFT - THERMO- DYNAMICS CYCLE:

Diagrams and charts of:

• Pressure in the cylinder; Pressure / Volume diagram;

• Gas force;

• Gas sigma (stress of gas part of force in the piston);

• Resulting force (inertia + gas);

• Resulting sigma (inertia + gas);

Crankshaft (thermo-dynamics cycle) - Pressure / Volume diagram

PORT AREAS:

• Port areas (diagrams and chart);

• Port heights (charts);

• Max. Area, Average Area, Angle-Area, Specific Angle-area, Time-area, Specific Time-area (numeric values in the "Resumptive charts");

• Blowdown range (numeric values in the "Resumptive charts");

Port areas - main exhaust port area

REED VALVE:

• Reed valve vibration frequence, 1st and 2nd order (numeric values in the "Resumptive charts");

• Reed valve area (numeric values in the "Resumptive charts").

COMBUSTION CHAMBER PLANNING:

• Squish height / Squish velocity (diagrams and chart);

• Effective compression ratio (numeric values in the "Resumptive charts").

• Geometric compression ratio (numeric values in the "Resumptive charts");

• Trapped volume (numeric values in the "Resumptive charts");

• Exhaust chamber volume (numeric values in the "Resumptive charts").

Combustion chamber planning - Squish height / Squish velocity diagram

INTAKE FORMULAS:

• Volumetric efficiency / Resonances RPM (diagrams and chart);

• Max. resonance RPM;

• Minimums and Maximums resonance RPM;

Intake formulas - Volumetric efficiency diagram

EXHAUST FORMULAS:

• Exhaust lenght. It is computed by only the gas temperature, max. RPM and exhaust period.;

• This value is shown in an animation showing also the pressure and rarefaction waves.

Exhaust formulas - animation showing the optimal muffler lenght

CONIC AND CYLINDERS PARTS DEVELOPMENT:

This function is a link to the "CONS" by SOFT-ENGINE. If "Cons" software is present in the PC, that software is run by this link to develop conics and cylindrics parts for exhaust system.

DIAGRAMS, CHARTS AND OTHER FEATURES

For each CRANKSHAFT and AREAS FACTORS computed quantity  (the most important) the following options are available:

• Max., min. and mean value; cursor to read all curve points;

• Zoom, graph scale management;

• Sizeable graphics window with complete colors management;

• Comparison of different "2TTOOL" projects (max 6 projects);

• File section: it is possible to create directories to classify projects in a single session;

• Long filename management;

• Different projects  compared charts;

• Printing page setup, with remarks,  logo and graphics management;

• Chart of all quantities.

Buy now with offers!

€ 50.00 € 40.00

SOFT-ENGINE s.r.l.  Via del Consorzio, 2  60015 Falconara M.ma (AN) - ITALY

PHONE: 0039-071-9156086 - 0039-071-0974868   MOBILE: 0039-3351006259   FAX: 0039-071-9189118   E-mail: info@soft-engine.com